--- /dev/null
+#include "configurator.h"
+#include "ui_creator.h"
+#include <QBoxLayout>
+#include <QVBoxLayout>
+#include <QHBoxLayout>
+#include <QLabel>
+#include <QMessageBox>
+
+#include <unistd.h>
+#include <termios.h> /* Terminal I/O support */
+#include <errno.h> /* Error number definitions */
+#include <fcntl.h> /* File descriptor manipulation */
+#include <stdio.h>
+#include <errno.h>
+
+#ifndef CBUFFER_SIZE
+#define CBUFFER_SIZE 32
+#endif
+
+const int count_devtype = 4;
+const char* dev_name[4] = {
+ "HM-TRP-433",
+ "HM-TRP-470",
+ "HM-TRP-868",
+ "HM-TRP-915"
+};
+
+const uint32_t freq_min[4] = {
+ 414 * 1e6,
+ 450 * 1e6,
+ 849 * 1e6,
+ 895 * 1e6
+};
+const uint32_t freq_max[4] = {
+ 454 * 1e6,
+ 490 * 1e6,
+ 889 * 1e6,
+ 935 * 1e6
+};
+const uint32_t freq_default[4] = {
+ 434 * 1e6,
+ 470 * 1e6,
+ 869 * 1e6,
+ 915 * 1e6
+};
+
+const int count_recv_bw = 12;
+// Values selected somewhat randomly...
+const int recv_bw[12] = {
+ 30,
+ 50,
+ 75,
+ 90,
+ 105,
+ 120,
+ 150,
+ 175,
+ 200,
+ 250,
+ 300,
+ 620
+};
+
+const int count_freq_dev = 10;
+// Values selected somewhat randomly...
+const int freq_dev[10] = { // Values as kHz ..
+ 10,
+ 20,
+ 35,
+ 50,
+ 55,
+ 80,
+ 110,
+ 120,
+ 145,
+ 160
+};
+
+const int count_powerlevel = 8;
+const int powerlevel[8] = { 1, 2, 5, 8, 11, 14, 17, 20 };
+
+const int count_rates = 9;
+const int port_rate_value[9] = {
+ 1200,
+ 1800,
+ 2400,
+ 4800,
+ 9600,
+ 19200,
+ 38400,
+ 57600,
+ 115200
+};
+
+const int port_rates[9] = {
+ B1200,
+ B1800,
+ B2400,
+ B4800,
+ B9600,
+ B19200,
+ B38400,
+ B57600,
+ B115200
+};
+
+const char cmd_reset[3] = { 0xAA, 0xFA, 0xF0 };
+const char cmd_config[3] = { 0xAA, 0xFA, 0xE1 };
+const char cmd_frequency[3] = { 0xAA, 0xFA, 0xD2 };
+const char cmd_air_rate[3] = { 0xAA, 0xFA, 0xC3 };
+const char cmd_bw[3] = { 0xAA, 0xFA, 0xB4 };
+const char cmd_deviation[3] = { 0xAA, 0xFA, 0xA5 };
+const char cmd_power[3] = { 0xAA, 0xFA, 0x96 };
+const char cmd_uart_rate[3] = { 0xAA, 0xFA, 0x1E };
+const char cmd_RSSI[3] = { 0xAA, 0xFA, 0x87 };
+const char cmd_SNR[3] = { 0xAA, 0xFA, 0x78 };
+
+int Configurator::write_uint32_t ( int f, uint32_t v )
+{
+ int i;
+ unsigned char buf[4];
+ v = __bswap_32(v);
+ for ( i = 0; i < 4; i++ )
+ buf[i] = (v>>(8*i) & 0xff );
+
+ return write( f, buf, 4 );
+}
+
+int Configurator::write_uint16_t ( int f, uint16_t v )
+{
+ int i;
+ unsigned char buf[2];
+ v = __bswap_16(v);
+ for ( i = 0; i < 2; i++ )
+ buf[i] = (v>>(8*i) & 0xff );
+
+ return write( f, buf, 2 );
+}
+
+int Configurator::write_uint8_t ( int f, uint8_t v )
+{
+ return write( f, &v, 1 );
+}
+
+int Configurator::write_cmd ( int f, const char* buf )
+{
+ return write( f, buf, 3 ); // Send the command to the device
+}
+
+int Configurator::read_config ( int fd, config_t * config )
+{
+
+ unsigned char buf[CBUFFER_SIZE];
+ int res;
+
+ res = write_cmd( fd, cmd_config ); // Send the command to the device
+ if ( res < 0 ) return(-1); // and die on failure..
+
+ //int i = 0;
+ uint8_t* tmp_config = (uint8_t*)config;
+ do {
+ bzero(buf, CBUFFER_SIZE);
+ res = read( fd, buf, 1 );
+
+ if ( res )
+ {
+ *tmp_config++ = (uint8_t)buf[0];
+ // Make sure wo don't overflow the config struct.
+ if ( (uint8_t*)tmp_config > ((uint8_t*)config+sizeof(config_t)) ) return(-2);
+ }
+
+ } while ( res > 0 );
+
+ if ( res < 0 )
+ {
+ return -1;
+ }
+
+ if ( config->freq )
+ {
+ config->freq = __bswap_32( config->freq );
+ config->air_rate = __bswap_32( config->air_rate );
+ config->bw = __bswap_16( config->bw );
+ config->uart_rate = __bswap_32( config->uart_rate );
+ return 1;
+ }
+
+ return 0; // No errors, but no valid config
+}
+
+int Configurator::read_ok ( int fd )
+{
+ unsigned char ok[5];
+ int i = 0;
+ unsigned char c;
+ bzero(ok, 5);
+
+ while( (read( fd, &c, 1 ) > 0 ) && ( i < 4) ) ok[i++] = c;
+ if ( strcmp( (const char*)ok, "OK\r\n" ) == 0 ) return 1;
+ return 0;
+}
+
+
+int Configurator::open_port ( const char* device, int rate )
+{
+ int f;
+ struct termios tio;
+
+ f = open ( device, O_RDWR | O_NOCTTY ); // Not using O_NDELAY, that caused ERR11: temp unavail.
+ if ( f < 0 )
+ {
+ return(-1);
+ }
+
+ tio.c_cflag = rate;
+
+ // 8 bits, local mode, read enabled
+ tio.c_cflag |= CS8 | CLOCAL | CREAD;
+
+ // no flow-control,
+ tio.c_cflag &= ~CRTSCTS;
+
+ // no parity
+ tio.c_iflag = IGNPAR;
+
+ tio.c_oflag = 0;
+ tio.c_lflag = 0; // Non-canonical read, no other options.
+ tio.c_cc[VMIN] = 0; // Disable minimum characters for read
+ tio.c_cc[VTIME] = 5; // Wait for a max of 0.5 second
+
+ tcsetattr(f,TCSANOW,&tio); // Apply this now.
+
+ tcflush(f, TCIOFLUSH); // the serial input buffer.
+
+ return f;
+}
+
+
+Configurator::Configurator(QWidget *parent) :
+ QMainWindow(parent),
+ ui(new Ui::Configurator)
+{
+
+ ui->setupUi(this);
+
+ config = (config_t*)malloc(sizeof(config_t));
+ bzero(config, sizeof(config_t));
+ connect(ui->serialPort, SIGNAL(returnPressed()), this, SLOT(on_readButton_clicked()));
+
+}
+
+Configurator::~Configurator()
+{
+ delete ui;
+}
+
+void Configurator::on_readButton_clicked()
+{
+ ui->statusBar->showMessage("Looking for device...");
+
+ ui->serialPort->setFocus();
+
+ ui->readButton->setEnabled(false);
+ ui->writeButton->setEnabled(false);
+ ui->defaultsButton->setEnabled(false);
+ update();
+ repaint();
+ QCoreApplication::processEvents();
+
+
+ QByteArray byteArray = (ui->serialPort->text()).toLocal8Bit();
+ const char* device = byteArray.constData();
+
+ bzero(config, sizeof(config_t));
+
+ for ( int r = 0; r <= count_rates; r++ )
+ {
+ cur_rate_i = port_rates[r];
+ int fd = open_port( device, cur_rate_i );
+ if ( fd < 0 )
+ {
+ ui->statusBar->showMessage( QString("Failed to open port: ") + QString ( strerror( errno )) );
+ ui->readButton->setEnabled(true);
+ return;
+ }
+
+ if ( read_config(fd, config) < 0 )
+ {
+ ui->statusBar->showMessage( QString("Failed to read config: ") + QString ( strerror( errno )) );
+ ui->readButton->setEnabled(true);
+ return;
+ }
+ if ( read_config( fd, config ) == 1 )
+ {
+ ui->statusBar->showMessage( QString("Found device at ") + QString().setNum( port_rate_value[r] ) );
+ printf("Read Verify-rate: %d\n", cur_rate_i);
+
+ if ( (config->air_rate < (uint32_t)port_rates[0]) ||
+ (config->uart_rate < (uint32_t)port_rates[0]) ||
+ (config->bw < (uint16_t)recv_bw[0] ) ||
+ (config->deviation < (uint8_t)freq_dev[0] ) )
+ {
+ QMessageBox::critical(this, QString("Power cycle device!"),
+ QString("The data returned by the connected ") + QString( dev_name[dev_model] ) + QString(" is invalid.\nPlease power-cycle your device by e.g. disconnecting\nand reconnectingbefore proceeding.")
+ );
+ }
+
+ printf("Freq %d \n", config->freq );
+ printf("Air rate %d \n", config->air_rate );
+ printf("Deviation %d \n", config->deviation );
+ printf("TX Power %d \n", config->power );
+ printf("BW %d \n", config->bw );
+ printf("UART rate %d \n", config->uart_rate );
+
+ ui->curRate->setText( QString().setNum( port_rate_value[r] ) );
+
+ for ( int i = 0; i < count_devtype; i++ )
+ {
+ if ( (config->freq >= freq_min[i]) &&
+ (config->freq <= freq_max[i]))
+ { dev_model = i; break; }
+ }
+
+ ui->devType->setText( QString( dev_name[dev_model] ) );
+
+ ui->airRate->clear();
+ for ( int i = 0; i < count_rates; i++ )
+ ui->airRate->insertItem(i, QString().setNum( port_rate_value[i] ) );
+
+ ui->uartRate->clear();
+ for ( int i = 0; i < count_rates; i++ )
+ ui->uartRate->insertItem(i, QString().setNum( port_rate_value[i] ) );
+
+ ui->recvBandwidth->clear();
+ for ( int i = 0; i < count_recv_bw; i++ )
+ ui->recvBandwidth->insertItem(i, QString().setNum( recv_bw[i] ) );
+
+ ui->freqDeviation->clear();
+ for ( int i = 0; i < count_freq_dev; i++ )
+ ui->freqDeviation->insertItem(i, QString().setNum( freq_dev[i] ) );
+
+ ui->powerLevel->clear();
+ for ( int i = 0; i < count_powerlevel; i++ )
+ ui->powerLevel->insertItem(i, QString().setNum( powerlevel[i] ) );
+
+ for ( int i = 0; i < count_rates; i++ )
+ if ( config->air_rate == (uint32_t)port_rate_value[i] )
+ ui->airRate->setCurrentIndex(i);
+
+ for ( int i = 0; i < count_rates; i++ )
+ if ( config->uart_rate == (uint32_t)port_rate_value[i] )
+ ui->uartRate->setCurrentIndex(i);
+
+ for ( int i = 0; i < count_recv_bw; i++ )
+ if ( config->bw == (uint16_t)recv_bw[i] )
+ ui->recvBandwidth->setCurrentIndex(i);
+
+ for ( int i = 0; i < count_freq_dev; i++ )
+ if ( config->deviation == (uint8_t)freq_dev[i] )
+ ui->freqDeviation->setCurrentIndex(i);
+
+ for ( int i = 0; i < count_powerlevel; i++ )
+ if ( powerlevel[config->power] == (uint8_t)powerlevel[i] )
+ ui->powerLevel->setCurrentIndex(i);
+
+ ui->frequency->setText( QString().setNum( config->freq/1000 ) );
+
+ ui->readButton->setEnabled(true);
+ ui->writeButton->setEnabled(true);
+ ui->defaultsButton->setEnabled(true);
+
+ ::close(fd);
+ return;
+ }
+ ::close(fd);
+ }
+
+ ui->statusBar->showMessage( QString("Unable to locate device!"), 10000);
+ QMessageBox::critical(this, QString("Unable to locate device"),
+ QString("Could not find a connected HM-TRP.\nPlease verify that the CONFIG pin is jumpered LOW,\nand power-cycle your device by e.g. disconnecting\nand reconnecting before proceeding.")
+ );
+
+ ui->readButton->setEnabled(true);
+
+}
+
+
+void Configurator::on_writeButton_clicked()
+{
+
+ ui->serialPort->setFocus();
+ ui->statusBar->showMessage( QString("Writing settings to device ...") );
+
+ ui->readButton->setEnabled(false);
+ ui->writeButton->setEnabled(false);
+ ui->defaultsButton->setEnabled(false);
+ update();
+ repaint();
+ QCoreApplication::processEvents();
+
+ QByteArray byteArray = (ui->serialPort->text()).toLocal8Bit();
+ const char* device = byteArray.constData();
+
+ int fd = open_port( device, cur_rate_i );
+ if ( fd < 0 )
+ {
+ ui->statusBar->showMessage( QString("Failed to open port: ") + QString ( strerror( errno )) );
+ ui->readButton->setEnabled(true);
+ return;
+ }
+
+ if ( read_config(fd, config) != 1 )
+ {
+ ui->statusBar->showMessage( QString("Failed to verify device config: ") + QString ( strerror( errno )) );
+ ui->readButton->setEnabled(true);
+ return;
+ }
+
+ uint32_t freq = (ui->frequency->text()).toInt() * 1000;
+ if (
+
+ ( freq < (uint32_t)freq_min[dev_model] ) ||
+ ( freq > (uint32_t)freq_max[dev_model] ) )
+ {
+ QMessageBox::critical(this, QString("Invalid frequency"),
+ QString("The given frequency is outside of the permitted range\n") +
+ QString("Device type ") + QString( dev_name[dev_model] ) + QString(" permits frequencies\n") +
+ QString("from ") + QString().setNum( freq_min[dev_model]/1000) + QString("kHz to ") + QString().setNum( freq_max[dev_model]/1000) + QString("kHz.")
+ );
+ return;
+ }
+
+ config->air_rate = ui->airRate->currentText().toInt();
+ config->bw = ui->recvBandwidth->currentText().toInt();
+ config->deviation = ui->freqDeviation->currentText().toInt();
+ config->freq = freq;
+ config->uart_rate = ui->uartRate->currentText().toInt();
+
+
+
+
+ for ( int i = 0; i < count_powerlevel; i++ )
+ {
+
+ if ( ui->powerLevel->currentText().toInt() == powerlevel[i] )
+ {
+ config->power = i;
+ break;
+ }
+ }
+
+ printf("After config changes:");
+ printf("Freq %d \n", config->freq );
+ printf("Air rate %d \n", config->air_rate );
+ printf("Deviation %d \n", config->deviation );
+ printf("TX Power %d \n", config->power );
+ printf("BW %d \n", config->bw );
+ printf("UART rate %d \n", config->uart_rate );
+
+ write_cmd( fd, cmd_frequency );
+ write_uint32_t( fd, config->freq );
+ if ( !read_ok( fd ) )
+ return errorStatus("Failed to set frequency");
+
+ write_cmd( fd, cmd_air_rate );
+ write_uint32_t( fd, config->air_rate );
+ if ( !read_ok( fd ) )
+ return errorStatus("Failed to set air data rate");
+
+ write_cmd( fd, cmd_bw );
+ write_uint16_t( fd, config->bw );
+ if ( !read_ok( fd ) )
+ return errorStatus("Failed to set recieve bandwidth");
+
+ write_cmd( fd, cmd_deviation );
+ write_uint8_t( fd, config->deviation );
+ if ( !read_ok( fd ) )
+ return errorStatus("Failed to set frequency deviation");
+
+ write_cmd( fd, cmd_power );
+ write_uint8_t( fd, config->power );
+ if ( !read_ok( fd ) )
+ return errorStatus("Failed to set transmit power");
+
+ write_cmd( fd, cmd_uart_rate );
+ write_uint32_t( fd, config->uart_rate );
+ read_ok( fd ); // Clear buffer.
+
+ ::close(fd);
+
+ on_readButton_clicked();
+
+}
+
+void Configurator::on_defaultsButton_clicked()
+{
+
+ ui->serialPort->setFocus();
+
+ ui->readButton->setEnabled(false);
+ ui->writeButton->setEnabled(false);
+ ui->defaultsButton->setEnabled(false);
+ update();
+ repaint();
+ QCoreApplication::processEvents();
+
+ QByteArray byteArray = (ui->serialPort->text()).toLocal8Bit();
+ const char* device = byteArray.constData();
+
+ int fd = open_port( device, cur_rate_i );
+ if ( fd < 0 )
+ {
+ ui->statusBar->showMessage( QString("Failed to open port: ") + QString ( strerror( errno )) );
+ ui->readButton->setEnabled(true);
+ return;
+ }
+
+ if ( read_config(fd, config) != 1 )
+ {
+ ui->statusBar->showMessage( QString("Failed to verify device config: ") + QString ( strerror( errno )) );
+ ui->readButton->setEnabled(true);
+ return;
+ }
+ write_cmd( fd, cmd_reset );
+ ::close(fd);
+
+ QMessageBox::critical(this, QString("Power cycle device!"),
+ QString("The reset command has been sent to the ") + QString( dev_name[dev_model] ) + QString(".\nPlease power-cycle your device by e.g. disconnecting\nand reconnectingbefore proceeding.")
+ );
+
+ on_readButton_clicked();
+
+}
+
+void Configurator::errorStatus(QString message)
+{
+ ui->statusBar->showMessage( message );
+ ui->readButton->setEnabled(true);
+ ui->writeButton->setEnabled(true);
+ ui->defaultsButton->setEnabled(true);
+}
--- /dev/null
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>Configurator</class>
+ <widget class="QMainWindow" name="Configurator">
+ <property name="geometry">
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>561</width>
+ <height>238</height>
+ </rect>
+ </property>
+ <property name="windowTitle">
+ <string>HM-TRP Configurator</string>
+ </property>
+ <widget class="QWidget" name="centralWidget">
+ <widget class="QWidget" name="layoutWidget">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>10</y>
+ <width>541</width>
+ <height>201</height>
+ </rect>
+ </property>
+ <layout class="QVBoxLayout" name="verticalLayout_3">
+ <item>
+ <layout class="QHBoxLayout" name="horizontalLayout_3">
+ <item>
+ <layout class="QVBoxLayout" name="verticalLayout_2">
+ <item>
+ <layout class="QHBoxLayout" name="horizontalLayout">
+ <item>
+ <widget class="QLabel" name="label">
+ <property name="text">
+ <string>Serial port</string>
+ </property>
+ </widget>
+ </item>
+ <item>
+ <widget class="QLineEdit" name="serialPort"/>
+ </item>
+ <item>
+ <spacer name="horizontalSpacer">
+ <property name="orientation">
+ <enum>Qt::Horizontal</enum>
+ </property>
+ <property name="sizeHint" stdset="0">
+ <size>
+ <width>40</width>
+ <height>20</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ </layout>
+ </item>
+ <item>
+ <layout class="QHBoxLayout" name="horizontalLayout_2">
+ <item>
+ <widget class="QLabel" name="label_4">
+ <property name="text">
+ <string>Device info:</string>
+ </property>
+ </widget>
+ </item>
+ <item>
+ <widget class="QFrame" name="frame">
+ <property name="frameShape">
+ <enum>QFrame::StyledPanel</enum>
+ </property>
+ <property name="frameShadow">
+ <enum>QFrame::Sunken</enum>
+ </property>
+ <layout class="QGridLayout" name="gridLayout">
+ <item row="0" column="1">
+ <widget class="QLabel" name="label_3">
+ <property name="text">
+ <string>Current UART rate</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0">
+ <widget class="QLineEdit" name="devType">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="focusPolicy">
+ <enum>Qt::NoFocus</enum>
+ </property>
+ <property name="readOnly">
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1">
+ <widget class="QLineEdit" name="curRate">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="focusPolicy">
+ <enum>Qt::NoFocus</enum>
+ </property>
+ <property name="readOnly">
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="0">
+ <widget class="QLabel" name="label_2">
+ <property name="text">
+ <string>Device type</string>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </widget>
+ </item>
+ </layout>
+ </item>
+ </layout>
+ </item>
+ <item>
+ <layout class="QHBoxLayout" name="horizontalLayout_4">
+ <item>
+ <spacer name="horizontalSpacer_2">
+ <property name="orientation">
+ <enum>Qt::Horizontal</enum>
+ </property>
+ <property name="sizeHint" stdset="0">
+ <size>
+ <width>40</width>
+ <height>20</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ <item>
+ <layout class="QVBoxLayout" name="verticalLayout">
+ <item>
+ <widget class="QPushButton" name="readButton">
+ <property name="text">
+ <string>Connect and read</string>
+ </property>
+ </widget>
+ </item>
+ <item>
+ <widget class="QPushButton" name="defaultsButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="text">
+ <string>Set device to defaults</string>
+ </property>
+ </widget>
+ </item>
+ <item>
+ <widget class="QPushButton" name="writeButton">
+ <property name="enabled">
+ <bool>false</bool>
+ </property>
+ <property name="text">
+ <string>Write to device</string>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </item>
+ <item>
+ <spacer name="horizontalSpacer_4">
+ <property name="orientation">
+ <enum>Qt::Horizontal</enum>
+ </property>
+ <property name="sizeHint" stdset="0">
+ <size>
+ <width>40</width>
+ <height>20</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ </layout>
+ </item>
+ </layout>
+ </item>
+ <item>
+ <layout class="QHBoxLayout" name="horizontalLayout_5">
+ <property name="spacing">
+ <number>0</number>
+ </property>
+ <item>
+ <layout class="QGridLayout" name="gridLayout_2">
+ <property name="sizeConstraint">
+ <enum>QLayout::SetDefaultConstraint</enum>
+ </property>
+ <item row="0" column="0">
+ <widget class="QLabel" name="label_10">
+ <property name="text">
+ <string>Operating frequency</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="1">
+ <widget class="QLineEdit" name="frequency">
+ <property name="minimumSize">
+ <size>
+ <width>120</width>
+ <height>0</height>
+ </size>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0">
+ <widget class="QLabel" name="label_6">
+ <property name="text">
+ <string>UART data rate</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1">
+ <widget class="QComboBox" name="uartRate">
+ <property name="minimumSize">
+ <size>
+ <width>120</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="editable">
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="0">
+ <widget class="QLabel" name="label_7">
+ <property name="text">
+ <string>Air data rate</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1">
+ <widget class="QComboBox" name="airRate">
+ <property name="minimumSize">
+ <size>
+ <width>120</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="editable">
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="2">
+ <widget class="QLabel" name="label_11">
+ <property name="text">
+ <string>kHz</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="2">
+ <widget class="QLabel" name="label_12">
+ <property name="text">
+ <string>bps</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="2">
+ <widget class="QLabel" name="label_13">
+ <property name="text">
+ <string>bps</string>
+ </property>
+ </widget>
+ </item>
+ </layout>
+ </item>
+ <item>
+ <layout class="QGridLayout" name="gridLayout_3">
+ <property name="sizeConstraint">
+ <enum>QLayout::SetDefaultConstraint</enum>
+ </property>
+ <item row="0" column="1">
+ <widget class="QLabel" name="label_8">
+ <property name="text">
+ <string>Recieving bandwidth</string>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="2">
+ <widget class="QComboBox" name="recvBandwidth">
+ <property name="minimumSize">
+ <size>
+ <width>120</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="editable">
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="1">
+ <widget class="QLabel" name="label_9">
+ <property name="text">
+ <string>Frequency deviation</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="2">
+ <widget class="QComboBox" name="freqDeviation">
+ <property name="minimumSize">
+ <size>
+ <width>120</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="editable">
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="1">
+ <widget class="QLabel" name="label_5">
+ <property name="text">
+ <string>Power Level</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="2">
+ <widget class="QComboBox" name="powerLevel">
+ <property name="minimumSize">
+ <size>
+ <width>120</width>
+ <height>0</height>
+ </size>
+ </property>
+ <property name="editable">
+ <bool>true</bool>
+ </property>
+ </widget>
+ </item>
+ <item row="0" column="3">
+ <widget class="QLabel" name="label_14">
+ <property name="text">
+ <string>kHz</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="3">
+ <widget class="QLabel" name="label_15">
+ <property name="text">
+ <string>kHz</string>
+ </property>
+ </widget>
+ </item>
+ <item row="2" column="3">
+ <widget class="QLabel" name="label_16">
+ <property name="text">
+ <string>dBm</string>
+ </property>
+ </widget>
+ </item>
+ <item row="1" column="0">
+ <spacer name="horizontalSpacer_3">
+ <property name="orientation">
+ <enum>Qt::Horizontal</enum>
+ </property>
+ <property name="sizeHint" stdset="0">
+ <size>
+ <width>40</width>
+ <height>20</height>
+ </size>
+ </property>
+ </spacer>
+ </item>
+ </layout>
+ </item>
+ </layout>
+ </item>
+ </layout>
+ </widget>
+ </widget>
+ <widget class="QStatusBar" name="statusBar"/>
+ </widget>
+ <layoutdefault spacing="6" margin="11"/>
+ <tabstops>
+ <tabstop>serialPort</tabstop>
+ <tabstop>readButton</tabstop>
+ <tabstop>frequency</tabstop>
+ <tabstop>uartRate</tabstop>
+ <tabstop>airRate</tabstop>
+ <tabstop>recvBandwidth</tabstop>
+ <tabstop>freqDeviation</tabstop>
+ <tabstop>powerLevel</tabstop>
+ <tabstop>defaultsButton</tabstop>
+ <tabstop>writeButton</tabstop>
+ <tabstop>devType</tabstop>
+ <tabstop>curRate</tabstop>
+ </tabstops>
+ <resources/>
+ <connections/>
+</ui>
git.defcon.no / hm-trp-tool / commitdiff