I needed the set_speed tool first, so that's what goes in initial commit.
--- /dev/null
+#!/bin/bash
+# Couldn't be bothered to make a proper make-file...
+
+for i in *.c
+do
+ gcc -c $i
+done
+
+gcc read_hm-trp.o hm-trp.o serial.o -o read_hm-trp
+gcc set_speed.o hm-trp.o serial.o -o set_speed
+
--- /dev/null
+#include "hm-trp.h"
+
+#include <stdio.h>
+
+#ifndef CBUFFER_SIZE
+#define CBUFFER_SIZE 32
+#endif
+
+const int count_devtype = 4;
+const char* dev_name[4] = {
+ "HM-TRP-433",
+ "HM-TRP-470",
+ "HM-TRP-868",
+ "HM-TRP-915"
+};
+
+const uint32_t freq_min[4] = {
+ 414 * 1e6,
+ 450 * 1e6,
+ 849 * 1e6,
+ 895 * 1e6
+};
+const uint32_t freq_max[4] = {
+ 454 * 1e6,
+ 490 * 1e6,
+ 889 * 1e6,
+ 935 * 1e6
+};
+const uint32_t freq_default[4] = {
+ 434 * 1e6,
+ 470 * 1e6,
+ 869 * 1e6,
+ 915 * 1e6
+};
+
+const int count_recv_bw = 12;
+// Values selected somewhat randomly...
+const int recv_bw[12] = {
+ 30,
+ 50,
+ 75,
+ 90,
+ 105,
+ 120,
+ 150,
+ 175,
+ 200,
+ 250,
+ 300,
+ 620
+};
+
+const int count_freq_dev = 10;
+// Values selected somewhat randomly...
+const int freq_dev[10] = { // Values as kHz ..
+ 10,
+ 20,
+ 35,
+ 50,
+ 55,
+ 80,
+ 110,
+ 120,
+ 145,
+ 160
+};
+
+const int count_powerlevel = 8;
+const int powerlevel[8] = { 1, 2, 5, 8, 11, 14, 17, 20 };
+
+const int count_rates = 9;
+const int port_rate_value[9] = {
+ 1200,
+ 1800,
+ 2400,
+ 4800,
+ 9600,
+ 19200,
+ 38400,
+ 57600,
+ 115200
+};
+
+const int port_rates[9] = {
+ B1200,
+ B1800,
+ B2400,
+ B4800,
+ B9600,
+ B19200,
+ B38400,
+ B57600,
+ B115200
+};
+
+const char cmd_reset[3] = { 0xAA, 0xFA, 0xF0 };
+const char cmd_config[3] = { 0xAA, 0xFA, 0xE1 };
+const char cmd_frequency[3] = { 0xAA, 0xFA, 0xD2 };
+const char cmd_air_rate[3] = { 0xAA, 0xFA, 0xC3 };
+const char cmd_bw[3] = { 0xAA, 0xFA, 0xB4 };
+const char cmd_deviation[3] = { 0xAA, 0xFA, 0xA5 };
+const char cmd_power[3] = { 0xAA, 0xFA, 0x96 };
+const char cmd_uart_rate[3] = { 0xAA, 0xFA, 0x1E };
+const char cmd_RSSI[3] = { 0xAA, 0xFA, 0x87 };
+const char cmd_SNR[3] = { 0xAA, 0xFA, 0x78 };
+
+int write_uint32_t ( int f, uint32_t v )
+{
+ int i;
+ unsigned char buf[4];
+ v = __bswap_32(v);
+ for ( i = 0; i < 4; i++ )
+ buf[i] = (v>>(8*i) & 0xff );
+
+ return write( f, buf, 4 );
+}
+
+int write_uint16_t ( int f, uint16_t v )
+{
+ int i;
+ unsigned char buf[2];
+ v = __bswap_16(v);
+ for ( i = 0; i < 2; i++ )
+ buf[i] = (v>>(8*i) & 0xff );
+
+ return write( f, buf, 2 );
+}
+
+int write_uint8_t ( int f, uint8_t v )
+{
+ int i;
+ unsigned char buf[2];
+
+ //for ( i = 0; i < 2; i++ )
+ // buf[i] = (v>>(8*i) & 0xff );
+
+ return write( f, &v, 1 );
+}
+
+int write_cmd ( int f, const char* buf )
+{
+ return write( f, buf, 3 ); // Send the command to the device
+}
+
+int read_config ( int fd, config_t * config )
+{
+
+ unsigned char buf[CBUFFER_SIZE];
+ int res;
+
+ res = write_cmd( fd, cmd_config ); // Send the command to the device
+ if ( res < 0 ) return(-1); // and die on failure..
+
+ int i = 0;
+ uint8_t* tmp_config = (uint8_t*)config;
+ do {
+ bzero(buf, CBUFFER_SIZE);
+ res = read( fd, buf, 1 );
+
+ if ( res )
+ {
+ *tmp_config++ = (uint8_t)buf[0];
+ // Make sure wo don't overflow the config struct.
+ if ( (void*)tmp_config > ((void*)config+sizeof(config_t)) ) return(-2);
+ }
+
+ } while ( res > 0 );
+
+ if ( res < 0 )
+ {
+ return -1;
+ }
+
+ if ( config->freq )
+ {
+ config->freq = __bswap_32( config->freq );
+ config->air_rate = __bswap_32( config->air_rate );
+ config->bw = __bswap_16( config->bw );
+ config->uart_rate = __bswap_32( config->uart_rate );
+ return 1;
+ }
+
+ return 0; // No errors, but no valid config
+}
+
+int read_ok ( int fd )
+{
+ unsigned char ok[5];
+ int i = 0;
+ unsigned char c;
+ bzero(ok, 5);
+
+ while( (read( fd, &c, 1 ) > 0 ) && ( i < 4) ) ok[i++] = c;
+ if ( strcmp( ok, "OK\r\n" ) == 0 ) return 1;
+ return 0;
+}
--- /dev/null
+#ifndef _HM_TRP_H
+#define _HM_TRP_H
+
+#include <string.h> /* String function definitions */
+#include <stdint.h> /* uint*_t types */
+#include <byteswap.h> /* __bwap_{16,32} */
+#include "serial.h"
+
+typedef struct {
+ uint32_t freq;
+ uint32_t air_rate;
+ uint16_t bw;
+ uint8_t deviation;
+ uint8_t power;
+ uint32_t uart_rate;
+} config_t;
+
+extern const int count_devtype;
+extern const char* dev_name[4];
+
+extern const uint32_t freq_min[4];
+extern const uint32_t freq_max[4];
+extern const uint32_t freq_default[4];
+
+extern const int count_recv_bw;
+extern const int recv_bw[12];
+
+extern const int count_freq_dev;
+extern const int freq_dev[10];
+
+extern const int count_powerlevel;
+extern const int powerlevel[8];
+
+extern const int count_rates;
+extern const int port_rate_value[9];
+extern const int port_rates[9];
+
+extern const char cmd_reset[3];
+extern const char cmd_config[3];
+extern const char cmd_frequency[3];
+extern const char cmd_air_rate[3];
+extern const char cmd_bw[3];
+extern const char cmd_deviation[3];
+extern const char cmd_power[3];
+extern const char cmd_uart_rate[3];
+extern const char cmd_RSSI[3];
+extern const char cmd_SNR[3];
+
+int write_uint32_t ( int f, uint32_t v );
+int write_uint16_t ( int f, uint16_t v );
+int write_uint8_t ( int f, uint8_t v );
+int write_cmd ( int f, const char* buf );
+int read_config ( int fd, config_t * config );
+
+int read_ok( int fd );
+
+#endif /* _HM_TRP_H */
--- /dev/null
+#include <errno.h> /* Error number definitions */
+#include <string.h> /* String function definitions */
+#include <stdio.h> /* Standard I/O */
+#include <unistd.h> /* sleep */
+#include <stdlib.h> /* malloc, free */
+
+#include "hm-trp.h"
+#include "serial.h"
+
+#define CBUFFER_SIZE 32
+
+int main ( int argc, char** argv )
+{
+ int fd;
+ int res;
+ int r, c, f;
+ unsigned char buf[CBUFFER_SIZE];
+
+ config_t* config = malloc(sizeof(config_t));
+ bzero(config, sizeof(config_t));
+
+ if ( ! argv[1] )
+ {
+ printf("Serial port device required as argument, e.g. /dev/ttyUSB0\n");
+ return 1;
+ }
+
+
+ printf("Looking for device on port %s\n", argv[1]);
+
+ for ( r = 0; r <= count_rates; r++ )
+ {
+ fd = open_port( argv[1], port_rates[r] );
+ if ( fd < 0 )
+ {
+ perror(argv[1]);
+ return(-1);
+ }
+
+ if ( read_config( fd, config ) == 1 )
+ {
+ printf("Found device at baud-rate %d, config:\n", port_rate_value[r] );
+ printf("Freq %d \n", config->freq );
+ printf("Air rate %d \n", config->air_rate );
+ printf("Deviation %d \n", config->deviation );
+ printf("TX Power %d \n", config->power );
+ printf("BW %d \n", config->bw );
+ printf("UART rate %d \n", config->uart_rate );
+
+
+ for ( f = 0; f < count_devtype; f++ )
+ {
+ if ( (config->freq >= freq_min[f]) &&
+ (config->freq <= freq_max[f]))
+ {
+ printf("Device type is %s\n", dev_name[f]);
+ }
+ }
+
+ return(0);
+ }
+ close(fd);
+ }
+ printf("Unable to find device on %s\n", argv[1]);
+ return(1);
+}
+
--- /dev/null
+#include "serial.h"
+
+int open_port ( char* device, int rate )
+{
+ int f;
+ struct termios tio;
+
+ f = open ( device, O_RDWR | O_NOCTTY ); // Not using O_NDELAY, that caused ERR11: temp unavail.
+ if ( f < 0 )
+ {
+ return(-1);
+ }
+
+ tio.c_cflag = rate | CS8 | CLOCAL | CREAD;
+
+ // 8 bits, local mode, read enabled
+ tio.c_cflag |= CS8 | CLOCAL | CREAD;
+
+ // no flow-control,
+ tio.c_cflag &= ~CRTSCTS;
+
+ // no parity
+ tio.c_iflag = IGNPAR;
+
+ tio.c_oflag = 0;
+ tio.c_lflag = 0; // Non-canonical read, no other options.
+ tio.c_cc[VMIN] = 0; // Disable minimum characters for read
+ tio.c_cc[VTIME] = 5; // Wait for a max of 0.5 second
+
+ tcsetattr(f,TCSANOW,&tio); // Apply this now.
+
+ tcflush(f, TCIFLUSH); // the serial input buffer.
+
+ return f;
+}
--- /dev/null
+#ifndef _SERIAL_H
+#define _SERIAL_H
+
+#include <termios.h> /* Terminal I/O support */
+#include <errno.h> /* Error number definitions */
+#include <fcntl.h> /* File descriptor manipulation */
+
+int open_port ( char* device, int rate );
+
+#endif /* _SERIAL_H */
--- /dev/null
+#include <errno.h> /* Error number definitions */
+#include <string.h> /* String function definitions */
+#include <stdio.h> /* Standard I/O */
+#include <unistd.h> /* sleep */
+#include <stdlib.h> /* malloc, free */
+
+#include "hm-trp.h"
+#include "serial.h"
+
+#define CBUFFER_SIZE 32
+
+int main ( int argc, char** argv )
+{
+ int fd;
+ int res;
+ int r, c, f;
+ long rate;
+
+ unsigned char buf[CBUFFER_SIZE];
+
+ config_t* config = malloc(sizeof(config_t));
+ bzero(config, sizeof(config_t));
+
+ if ( ! argv[1] )
+ {
+ printf("Serial port device required as argument, e.g. /dev/ttyUSB0\n");
+ return 1;
+ }
+
+ if ( ! argv[2] )
+ {
+ printf("Desired bit-rate required. Use RS232 rates only.\n");
+ return 1;
+ }
+
+ rate = atol( argv[2] );
+ for ( r = 0; r <= count_rates; r++ )
+ if ( port_rate_value[r] == rate ) { rate = r; break; }
+
+ if ( r >= count_rates ) { printf("Invalid data rate requested\n"); return 1; }
+
+ printf("Looking for device on port %s\n", argv[1]);
+
+ for ( r = 0; r <= count_rates; r++ )
+ {
+ fd = open_port( argv[1], port_rates[r] );
+ if ( fd < 0 )
+ {
+ perror(argv[1]);
+ return(-1);
+ }
+
+ if ( read_config( fd, config ) == 1 )
+ {
+ printf("Found device at baud-rate %d.\n", port_rate_value[r] );
+
+ if ( r == rate && ( config->air_rate == config->uart_rate ) )
+ {
+ printf("Data rate is already set to %d\n", port_rate_value[r] );
+ return 0;
+ }
+
+ write_cmd( fd, cmd_air_rate );
+ write_uint32_t( fd, port_rate_value[rate] );
+
+ if ( ! read_ok( fd ) )
+ {
+ printf("Air rate NOT set\n");
+ return 1;
+ }
+
+ write_cmd( fd, cmd_uart_rate );
+ write_uint32_t( fd, port_rate_value[rate] );
+
+ read_ok( fd ); // Clear buffer.
+
+ printf("Device UART and air data rate set to %d\n", port_rate_value[rate] );
+ return(0);
+ }
+ close(fd);
+ }
+ printf("Unable to find device on %s\n", argv[1]);
+ return(1);
+}
+
--- /dev/null
+#include <bits/byteswap.h> /* __bwap_{16,32} */
+
+/*
+ Basically, does:
+uint32_t swap_uint32 ( uint32_t num )
+{
+ return ( (num>>24) & 0x000000ff) | // move byte 3 to byte 0
+ ( (num<<8) & 0x00ff0000) | // move byte 1 to byte 2
+ ( (num>>8) & 0x0000ff00) | // move byte 2 to byte 1
+ ( (num<<24) & 0xff000000); // byte 0 to byte 3
+}
+
+uint16_t swap_uint16 ( uint16_t num )
+{
+ // Move UP and mask | Move DOWN and mask
+ return( (num<<8) & 0xff00 ) | ( (num>>8) & 0x00ff );
+}
+*/
+
git.defcon.no / hm-trp-tool / commitdiff