#!/usr/bin/perl
-
-use Test::More 'no_plan';
+# Copyright (c) 2012, Gjøvik University College
+# All rights reserved.
+
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# * Neither the name of the Gjøvik University College nor the
+# names of its contributors may be used to endorse or promote products
+# derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY Gjøvik University College ''AS IS'' AND ANY
+# EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL Gjøvik University College BE LIABLE FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
use strict;
-use LWP;
-use Data::Dumper;
-use JSON;
-
-my $api_base = "http://10.0.2.5/hermes/api/";
-my $api_key = "6327c08b70f9";
-my $api_user = "test";
-my $api_pass = "Very5ecr3t";
-
-my $test_username = "testuser-" . int(rand(255));
-my $test_aliasname = "testalias-" . int(rand(255));
-
-my $test_domain = "example.com"; #TODO: Must fetch this from API
-
-my $test_remote_domain = "external.example.com";
+use Test::More 'no_plan';
+use tests_common;
-# plan tests => 2;
-my ($g_ua, $response, $data, $temp);
+# Configuration variables defined in tests_common
+# Make sure those are updated/set correctly..
+# $api_base
+# $api_key
+#
+# Further variables defined in tests_common:
+# $invalid_key
+# $test_username
+# $test_password
+# $invalid_username
+my ($data, $temp, $test_domain, $test_remote_domain );
-$g_ua = LWP::UserAgent->new;
isa_ok( $g_ua, 'LWP::UserAgent', '$g_ua');
-
-$g_ua->cookie_jar({}); # In-memory jar, look at HTTP::Cookies for persistant
isa_ok( $g_ua->cookie_jar, 'HTTP::Cookies', '$g_ua->cookies');
-TODO: {
- local $TODO = 'auth/login not implemented yet';
- $response = $g_ua->get( $api_base . "auth/login?username=" . $api_user .
- "password=" . $api_pass . "&key=" . $api_key);
+login_apikey();
+
+# First: fetch a supported domain from the API...
+$data = exec_apinode("domain/list", undef);
+ok($data, 'domain/list JSON decode');
+is( $data->{'response'}, 'ok', 'domain/list result');
+ok($data->{'list'}, 'domain/list array');
+
+# NOW: Set the $test_domain to something useful (i.e. the first reported domain)
+$test_domain = $data->{'list'}[0];
+$test_remote_domain = "external." . $test_domain;
- #$data = decode_json( $response->content);
- is( $data->{'response'}, 'ok', 'auth/login');
- undef $response; undef $data;
-}
+ok($test_domain, 'test_domain set.');
+ok($test_remote_domain, 'test_remote_domain set.');
+undef $data;
-$response = $g_ua->get( $api_base . "user/list");
-isa_ok( $response, 'HTTP::Response', 'user/list $response');
-ok ($response->is_success, 'user/list is_success');
-$data = decode_json( $response->content);
+$data = exec_apinode("user/list", undef);
ok($data, 'user/list JSON decode');
-is( $data->{'response'}, 'ok', 'user/list result');
+is($data->{'response'}, 'ok', 'user/list result');
ok($data->{'list'}, 'user/list array');
-undef $response; undef $data;
+undef $data;
-$response = $g_ua->get( $api_base . "user/available?user=" . $test_username . "\@" . $test_domain);
-$data = decode_json( $response->content);
+$data = exec_apinode("user/available", { "user" => $test_username . "\@" . $test_domain });
is( $data->{'response'}, 'ok', 'user/available is available');
-undef $response; undef $data;
+undef $data;
-$response = $g_ua->get( $api_base . "user/add_local?user=" . $test_username . "\@" . $test_domain . "&displayname=Automatic testing&email=noreply\@" . $test_domain);
-$data = decode_json( $response->content);
+$data = exec_apinode("user/add_local", {
+ "user" => $test_username . "\@" . $test_domain,
+ "displayname" => "Automatic testing",
+ "email" => "noreply\@" . $test_domain,
+} );
is( $data->{'response'}, 'ok', 'user/add_local created new account');
#TODO: Add tests to verify the data from add_local...
-undef $response; undef $data;
+undef $data;
-$response = $g_ua->get( $api_base . "user/available?user=" . $test_username . "\@" . $test_domain);
-$data = decode_json( $response->content);
-is( $data->{'response'}, 'failed', 'user/available has been created');
-undef $response; undef $data;
+$data = exec_apinode("user/available", { "user" => $test_username . "\@" . $test_domain });
+is( $data->{'response'}, 'failed', 'user/available has been created');
+undef $data;
-$response = $g_ua->get( $api_base . "user/get?user=" . $test_username . "\@" . $test_domain);
-$data = decode_json( $response->content);
+$data = exec_apinode("user/get", { "user" => $test_username . "\@" . $test_domain });
is( $data->{'response'}, 'ok', 'user/get returns');
is( $data->{'user'}->{'username'}, $test_username, 'user/get username correct');
is( $data->{'user'}->{'domain'}, $test_domain, 'user/get domain correct');
-ok( $data->{'user'}->{'ha1'} =~ m/[a-z0-9]{16,}/, 'user/get ha1 hash generated');
-undef $response; undef $data;
-
-$response = $g_ua->get( $api_base . "user/gen_pw");
-ok( $response->content =~ m/[a-z0-9]{24}/, 'user/gen_pw format OK');
-$temp = $response->content;
-undef $response; undef $data;
-
-$response = $g_ua->get( $api_base . "user/change_pw?user=" . $test_username . "\@" . $test_domain . "&password=" . $temp );
-$data = decode_json( $response->content);
+ok( $data->{'user'}->{'ha1'} =~ m/[a-z0-9]{16,}/, 'user/get ha1 hash generated');
+undef $data;
+
+$data = exec_apinode("user/gen_pw", undef);
+ok( $data =~ m/[a-zA-Z0-9]{24}/, 'user/gen_pw format OK');
+$temp = $data;
+undef $data;
+
+$data = exec_apinode("user/change_pw", {
+ "user" => $test_username . "\@" . $test_domain,
+ "password" => $temp,
+} );
is( $data->{'response'}, 'ok', 'user/change_pw');
-undef $response; undef $data;
+undef $data;
# TODO: This tests _almost_ all parameters. Update API docs, then update this test.
-$response = $g_ua->get( $api_base . "user/update?user=" . $test_username . "\@" . $test_domain .
- "&displayname=Changed" .
- "&linetext=" . $test_username .
- "®istrar=registrar." . $test_domain .
- "&r_port=5061" .
- "&proxy=proxy." . $test_domain .
- "&p_port=5060");
-
-$data = decode_json( $response->content);
+$data = exec_apinode("user/update", {
+ "user" => $test_username . "\@" . $test_domain,
+ "displayname" => "Changed",
+ "linetext" => $test_username,
+ "registrar" => "registrar." . $test_domain,
+ "r_port" => 5061,
+ "proxy" => "proxy." . $test_domain,
+ "p_port" => 5060,
+});
is( $data->{'response'}, 'ok', 'user/update');
ok( $data->{'updated'}, 'user/update updated list');
ok( $data->{'skipped'}, 'user/update skipped list');
-undef $response; undef $data;
+undef $data;
-$response = $g_ua->get( $api_base . "user/remove?user=" . $test_username . "\@" . $test_domain);
-$data = decode_json( $response->content);
+$data = exec_apinode("user/remove", { "user" => $test_username . "\@" . $test_domain });
is( $data->{'response'}, 'ok', 'user/remove deleted user');
-undef $response; undef $data;
-
-$response = $g_ua->get( $api_base . "user/add_remote?user=" . $test_username . "\@" . $test_domain .
- "&displayname=Automatic testing" .
- "&password=verysecretpasswd" .
- "®istrar=registrar" . $test_domain);
-
-$data = decode_json( $response->content);
+undef $data;
+
+$data = exec_apinode("user/add_remote", {
+ "user" => $test_username . "\@" . $test_domain,
+ "displayname" => "Automatic testing",
+ "password" => "verysecretpasswd",
+ "registrar" => "registrar" . $test_domain,
+});
is( $data->{'response'}, 'failed', 'user/add_remote fails for local domain');
#TODO: Add tests to verify the data from add_local...
-undef $response; undef $data;
+undef $data;
-$response = $g_ua->get( $api_base . "user/add_remote?user=" . $test_username . "\@" . $test_remote_domain .
- "&displayname=Automatic testing" .
- "&password=verysecretpasswd" .
- "®istrar=registrar" . $test_domain);
+$data = exec_apinode("user/add_remote", {
+ "user" => $test_username . "\@" . $test_remote_domain,
+ "displayname" => "Automatic testing",
+ "password" => "verysecretpasswd",
+ "registrar" => "registrar" . $test_domain,
-$data = decode_json( $response->content);
+});
is( $data->{'response'}, 'ok', 'user/add_remote ok for remote domain');
-#TODO: Add tests to verify the data from add_local...
-undef $response; undef $data;
-
+#TODO: Add tests to verify the data from add_remote...
+undef $data;
-$response = $g_ua->get( $api_base . "user/available?user=" . $test_username . "\@" . $test_remote_domain);
-$data = decode_json( $response->content);
+$data = exec_apinode("user/available", { "user" => $test_username . "\@" . $test_remote_domain });
is( $data->{'response'}, 'failed', 'user/available has been created');
-undef $response; undef $data;
+undef $data;
+
-$response = $g_ua->get( $api_base . "user/remove?user=" . $test_username . "\@" . $test_remote_domain);
-$data = decode_json( $response->content);
+$data = exec_apinode("user/remove", { "user" => $test_username . "\@" . $test_remote_domain });
is( $data->{'response'}, 'ok', 'user/remove deleted user');
-undef $response; undef $data;
-
-TODO: {
- local $TODO = 'auth/logout not implemented yet';
- $response = $g_ua->get( $api_base . "auth/logout");
- #$data = decode_json( $response->content);
- is( $data->{'response'}, 'ok', 'auth/logout');
- undef $response; undef $data;
-}
+undef $data;
+
+logout();
+
git.defcon.no / hermes / blobdiff