From 167ebe9be8e7cf1bf403dbeb017267e9a188f439 Mon Sep 17 00:00:00 2001
From: Jon Langseth <jon.langseth@lilug.no>
Date: Mon, 9 Jul 2012 23:51:57 +0200
Subject: [PATCH] Cleaning up a bit. set_speed no longer needed, QT-Tool does
 the job better.

---
 build.sh       |  2 --
 set_speed.c    | 85 --------------------------------------------------
 swap.c_example | 19 -----------
 3 files changed, 106 deletions(-)
 delete mode 100644 set_speed.c
 delete mode 100644 swap.c_example

diff --git a/build.sh b/build.sh
index 21cc481..8c2c694 100755
--- a/build.sh
+++ b/build.sh
@@ -7,5 +7,3 @@ do
 done
 
 gcc read_hm-trp.o hm-trp.o serial.o -o read_hm-trp
-gcc set_speed.o hm-trp.o serial.o -o set_speed
-
diff --git a/set_speed.c b/set_speed.c
deleted file mode 100644
index c29393c..0000000
--- a/set_speed.c
+++ /dev/null
@@ -1,85 +0,0 @@
-#include <errno.h>   /* Error number definitions */
-#include <string.h>  /* String function definitions */
-#include <stdio.h>   /* Standard I/O */
-#include <unistd.h>  /* sleep */
-#include <stdlib.h>  /* malloc, free */
-
-#include "hm-trp.h"
-#include "serial.h"
-
-#define CBUFFER_SIZE 32
-
-int main ( int argc, char** argv )
-{
-	int fd;
-	int res;
-	int r, c, f;
-	long rate;
-
-	unsigned char buf[CBUFFER_SIZE];
-
-	config_t* config = malloc(sizeof(config_t));
-	bzero(config, sizeof(config_t));
-
-	if ( ! argv[1] )
-	{
-		printf("Serial port device required as argument, e.g. /dev/ttyUSB0\n");
-		return 1;
-	}
-
-	if ( ! argv[2] )
-	{
-		printf("Desired bit-rate required. Use RS232 rates only.\n");
-		return 1;
-	}
-
-	rate = atol( argv[2] );
-	for ( r = 0; r <= count_rates; r++ )
-		if ( port_rate_value[r] == rate ) { rate = r; break; }
-
-	if ( r >= count_rates ) { printf("Invalid data rate requested\n"); return 1; }
-
-	printf("Looking for device on port %s\n", argv[1]);
-
-	for ( r = 0; r <= count_rates; r++ )
-	{
-		fd = open_port( argv[1], port_rates[r] );
-		if ( fd < 0 )
-		{
-			perror(argv[1]); 
-			return(-1);
-		}
-
-		if ( read_config( fd, config )  == 1 )
-		{
-			printf("Found device at baud-rate %d.\n", port_rate_value[r] );
-
-			if ( r == rate  && ( config->air_rate == config->uart_rate ) )
-			{
-				printf("Data rate is already set to %d\n", port_rate_value[r] );
-				return 0;
-			}
-
-			write_cmd( fd, cmd_air_rate );
-			write_uint32_t( fd, port_rate_value[rate] );
-
-			if ( ! read_ok( fd ) )
-			{
-				printf("Air rate NOT set\n");
-				return 1;
-			}
-
-			write_cmd( fd, cmd_uart_rate );
-			write_uint32_t( fd, port_rate_value[rate] );
-
-			read_ok( fd ); // Clear buffer.
-
-			printf("Device UART and air data rate set to %d\n", port_rate_value[rate] );
-			return(0);
-		}
-		close(fd);
-	}
-	printf("Unable to find device on %s\n", argv[1]);
-	return(1);
-}
-
diff --git a/swap.c_example b/swap.c_example
deleted file mode 100644
index 401f53a..0000000
--- a/swap.c_example
+++ /dev/null
@@ -1,19 +0,0 @@
-#include <bits/byteswap.h> /* __bwap_{16,32} */
-
-/*
-  Basically, does:
-uint32_t swap_uint32 ( uint32_t num )
-{
-	return  ( (num>>24) & 0x000000ff) |    // move byte 3 to byte 0
-		( (num<<8)  & 0x00ff0000) |   // move byte 1 to byte 2
-		( (num>>8)  & 0x0000ff00) |     // move byte 2 to byte 1
-		( (num<<24) & 0xff000000); // byte 0 to byte 3
-}
-
-uint16_t swap_uint16 ( uint16_t num )
-{
-	//          Move UP and mask    | Move DOWN and mask
-	return( (num<<8) & 0xff00 ) | ( (num>>8) & 0x00ff ); 
-}
-*/
-
-- 
2.39.2